INSTALLATION
PROCEDURE
1. INSTALL STEERING VIBRATION AND HEATER ECU
(a) Connect the connector to the steering vibration and heater ECU.
(b) Install the steering vibration and heater ECU to the lower steering wheel boss cover with the 2 screws.
NOTICE:
If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.
| (c) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel assembly. |
|
(d) Install the screw.
(e) Connect each connector to the steering vibration and heater ECU.
(f) Engage the guide to install the wire harness to the lower steering wheel cover.
2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
for U881F: Click here
for U881E: Click here
3. INSTALL STEERING PAD SWITCH ASSEMBLY
Click here
4. INSTALL CRUISE CONTROL MAIN SWITCH
Click here
5. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
6. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Click here
7. INSTALL STEERING WHEEL ASSEMBLY
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Clearance Warning Buzzer (for Rear Side Without Rear No. 2 Seat): Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 CLEARANCE WARNING BUZZER (a) Connect the connector. (b) Engage the clamp to install the No. 2 clearance warning buzzer. 2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Click here 3. INSTALL RECLINING REMOTE CONTROL BEZEL RH (w/o Rear Power Seat System) Click her ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear No. 2 Seat Outer Belt Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY Click here 2. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY (a) Engage the 2 guides and tempo ...