REASSEMBLY
CAUTION / NOTICE / HINT
NOTICE:
PROCEDURE
1. INSTALL POWER STEERING ECU ASSEMBLY
Click here
2. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
| (a) Engage the claw to install the multiplex tilt and telescopic ECU. |
|
3. INSTALL STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY
(a) Secure the steering column assembly in a vise between aluminum plates and cloths.
NOTICE:
Do not overtighten the vise.
| (b) Temporarily install the steering lock actuator or upper bracket assembly with 2 new steering lock set bolts. |
|
(c) Tighten the 2 steering lock set bolts until the bolt head breaks off.
Installation
RemovalLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Certification Ecu: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during certification ECU (smart key ECU assembly) removal/installation are shown below. Necessary Procedure Af ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Navigation System: Steering Pad Switch Circuit
DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the radio receiver assembly. If there is an open in the circuit, the navigation system cannot be operated using the steering pad switch assembly. If there is a short in the circuit, the same condition as when ...