DESCRIPTION
This DTC is stored when a malfunction occurs in the navigation ECU.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
B15AD | Navigation Processor Malfunction | When either condition below is met:
| Navigation ECU |
PROCEDURE
1. | CHECK DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
OK | ![]() | USE SIMULATION METHOD TO CHECK |
NG | ![]() | REPLACE NAVIGATION ECU |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Panoramic Moon Roof System: Terminals Of Ecu
TERMINALS OF ECU CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) (a) Disconnect the U2 sliding roof ECU (sliding roof drive gear assembly) connector. (b) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness side with ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Headup Display Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL HEADUP DISPLAY SWITCH ASSEMBLY (INTEGRATION CONTROL AND PANEL ASSEMBLY) (a) Engage the 4 claws as shown in the illustration to install the headup display switch assembly (integration control and panel assembly). Install in this Direction 2. INSTALL LOWER I ...