INSTALLATION
PROCEDURE
1. INSTALL STEERING HEATER SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)
(a) Engage the 4 claws to install the steering heater switch (integration control and panel assembly).
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Click here
3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here
4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
5. INSTALL COWL SIDE TRIM BOARD LH
Click here
6. INSTALL FRONT DOOR SCUFF PLATE LH
w/ Rear No. 2 Seat: Click here
w/o Rear No. 2 Seat: Click here
7. INSTALL INSTRUMENT PANEL GARNISH LH
Click here
Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 8 Inch Display): Telematics Transceiver Disconnected (B15DB)
DESCRIPTION If the radio receiver assembly cannot detect the DCM (telematics transceiver) for a certain period of time (90 seconds) after the engine switch is turned on (ACC) and the radio receiver assembly confirms that the information is missing by checking past DCM (telematics transceiver) recogn ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Warning Light Remains ON
DESCRIPTION This procedure is for troubleshooting when the brake warning light remains on but no DTCs are output. The skid control ECU (brake actuator assembly) controls the brake warning light in the combination meter assembly via CAN communication. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: ...