Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 claws and 2 pins to install the steering pad switch assembly.

(b) Install the 2 screws.

Torque:

2.4 N·m {24 kgf·cm, 21 in·lbf}

(c) Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.

2. INSTALL HORN BUTTON ASSEMBLY

Click here

    Inspection
    INSPECTION PROCEDURE 1. INSPECT STEERING PAD SWITCH ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Text in Illustration *A w/ Lane Departure Alert System - ...

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the st ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blower Unit: Installation
    INSTALLATION PROCEDURE 1. INSTALL CLEAN AIR FILTER (a) Engage the 4 guides as indicated by the arrows, in the order shown in the illustration to install the clean air filter to the air filter case. Install in this Direction (1) Install in this Direction (2) NOTICE: Make sure that the ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Charging System: Charging Failure
    PROCEDURE 1. CHECK GENERATOR PULLEY WITH CLUTCH (ON-VEHICLE INSPECTION) (a) Start the engine and visually check that the generator rotor assembly (fan) in the generator assembly is operating. OK: The generator rotor assembly (fan) is operating. NG REPLACE GENERATOR PULLEY WITH CLUTC ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0093