CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
1. | CHECK VEHICLE SIGNAL (OPERATION CHECK) |
(a) Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check. Click here |
|
(b) Check that the display changes between ON and OFF according to the light control switch operation.
OK:
Light Control Switch | Display |
---|---|
Tail or head | ON |
Off or AUTO | OFF |
HINT:
OK | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
NG | ![]() | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Can Communication System: Check Bus 1 Line for Short to +B
DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when there is no resistance between terminal 23 (CA1H) of the network gateway ECU and terminal 16 (BAT) of the DLC3, or terminal 8 (CA1L) of the network gateway ECU and terminal 16 (BAT) of the DLC3. Symptom Troubl ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Fuel Pump (for Tmmc Made): Inspection
INSPECTION PROCEDURE 1. INSPECT FUEL PUMP (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Specified Condition U - V 0.05 to 3.0 Ω V - W 0.05 to 3.0 Ω U - W 0.05 to 3.0 Ω If the result is not as specified ...