INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY
(a) Engage the 6 clips as shown in the illustration.
| Install in this Direction |
(b) Install the body rocker panel moulding assembly with the 2 screws and 9 clips.
2. INSTALL ROCKER PANEL MOULDING COVER
(a) Engage the 2 claws as shown in the illustration to install the rocker panel moulding cover.
HINT:
Use the same procedure for the other rocker panel moulding cover.
| Install in this Direction |
3. INSTALL QUARTER PANEL WHEEL OPENING MOULDING
Click here
4. INSTALL NO. 6 ROCKER PANEL MOULDING PROTECTOR
Click here
5. INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY
Click here
6. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fuel System: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK FUEL PUMP OPERATION AND INSPECT FOR FUEL LEAK (a) Check fuel pump operation. (1) Connect the Techstream to the DLC3. (2) Turn the engine switch on (IG). NOTICE: Do not start the engine. (3) Turn the Techstream on. (4) Enter the following menus: Powertrain / E ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Transmission Control Cable: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transmission control cable assembly removal/installation are shown below. Necessary Procedures After Par ...