INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL HEADLIGHT GASKET
(a) Install a new headlight gasket.
2. INSTALL NO. 1 HEADLIGHT ECU SUB-ASSEMBLY
NOTICE:
If the No. 1 headlight light ECU sub-assembly has been struck or dropped, replace it with a new one.
(a) for Single Beam Headlight:
(1) Connect the connector.
(b) except Single Beam Headlight:
(1) Connect the 2 connectors.
(c) Install the connector cover to the No. 1 headlight ECU sub-assembly.
(d) Install the No. 1 headlight ECU sub-assembly with the 3 screws.
3. INSTALL HEADLIGHT ASSEMBLY
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting (ext): License Plate Light Assembly
ComponentsCOMPONENTS ILLUSTRATION *1 LICENSE PLATE LIGHT ASSEMBLY - - RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY Click her ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Bumper (w/ Rear No. 2 Seat): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR BUMPER UPPER RETAINER LH (a) Engage the 2 guides as shown in the illustration to install the rear bumper upper retainer LH to the rear combination light assembly LH. Install in this Direction (b) Engage the grommet. (c) Engage the guide and pin as shown ...