DTC CHECK / CLEAR
CHECK FOR DTC (MAIN BODY)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Body Electrical > Main Body > Trouble Codes(e) Check for DTCs.
CHECK FOR DTC (AFS) (for Multiple Beam Headlight)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.
Body Electrical > AFS > Trouble Codes(e) Check for DTCs.
CHECK FOR DTC (HL AUTOLEVELING) (for Single Beam Headlight)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Body Electrical > HL AutoLeveling > Trouble Codes(e) Check for DTCs.
CHECK FOR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL)) (w/ Automatic High Beam System)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes(e) Check for DTCs.
CLEAR DTC (MAIN BODY)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Body Electrical > Main Body > Clear DTCs(e) Clear the DTCs.
CLEAR DTC (AFS) (for Multiple Beam Headlight)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.
Body Electrical > AFS > Clear DTCs(e) Clear the DTCs.
CLEAR DTC (HL AUTOLEVELING) (for Single Beam Headlight)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Body Electrical > HL AutoLeveling > Clear DTCs(e) Clear the DTCs.
CLEAR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL)) (w/ Automatic High Beam System)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs(e) Clear the DTCs.
Terminals Of Ecu
Freeze Frame DataLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Outer Rear View Mirror: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side television camera assembly removal/installation are shown below. Necessary Procedure After Parts R ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Heated Steering Wheel System: Fail-safe Chart
FAIL-SAFE CHART MALFUNCTION DETECTION (a) Operation when malfunction is detected Content Operation Heater failure Overcurrent detection of drive element Heater output off Overheating detection of drive element Heater output off Power failure Low-voltage detection Heater ou ...