PROBLEM SYMPTOMS TABLE
NOTICE:
If the battery voltage is low, the mirror heater function may not operate. When "Operation of Electrical Items Restricted." is displayed on the multi-information display in the combination meter assembly, check the Data List item "Battery Control Count (Body ECU)".
Click here
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| Driver side power mirror cannot be adjusted with power mirror switch | Proceed to "Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch" | |
| Front passenger side power mirror cannot be adjusted with power mirror switch | Proceed to "Front Passenger Side Power Mirror cannot be Adjusted with Power Mirror Switch" | |
| Power mirror cannot be adjusted with power mirror switch | Proceed to "Power Mirror cannot be Adjusted with Power Mirror Switch" | |
| Mirror heater does not operate with rear defogger switch | Proceed to "Mirror Heater does not Operate with Rear Defogger Switch" | |
| Power mirror surface position is not memorized (Registration operation that does not use wireless or smart key is not functioning) | Proceed to "Power Mirror Surface Position is not Memorized" | |
| Power retract mirrors do not operate with power retract mirror switch | Proceed to "Power Retract Mirrors do not Operate with Power Retract Mirror Switch" | |
| AUTO power retract mirrors do not operate | Proceed to "AUTO Power Retract Mirrors do not operate" | |
| Power mirrors do not return to memorized position (Recall operation that does not use wireless or smart key is not functioning) | Proceed to "Power Mirrors do not Return to Memorized Position" | |
| Reverse shift-linked function of power mirrors does not operate | Proceed to "Reverse Shift-linked Function of Power Mirrors does not Operate" | |
| Wireless transmitter memory function does not operate (Registration operation that uses wireless or smart key is not functioning) | Operation check - memory and reactivation function | |
| Front power seat control system | | |
| Outer mirror control ECU assembly (driver door) | - | |
| Outer mirror control ECU assembly (front passenger door) | - | |
| Wireless-linked return function does not operate (Recall operation that uses wireless or smart key is not functioning) | Operation check - memory and reactivation function | |
| Front power seat control system | | |
| Outer mirror control ECU assembly (driver door) | - | |
| Outer mirror control ECU assembly (front passenger door) | - | |
| Automatic glare-resistant EC mirror does not operate | Inner rear view mirror assembly | |
| Outer rear view mirror assembly (driver door) | - | |
| Outer rear view mirror assembly (front passenger door) | - | |
| Wire harness or connector | - |
Customize Parameters
Terminals Of EcuLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Throttle/Pedal Position Sensor/Switch "D" Circuit Short to Battery (P212012,P212014,P21201F,P212512,P212514,P21251F,P21382B)
DESCRIPTION HINT:
This Electronic Throttle Control System (ETCS) does not use a throttle cable.
These DTCs relate to the accelerator pedal position sensor.
The accelerator pedal position sensor is built into the accelerator pedal sensor assembly and has 2 sensor circuits: VPA (main) and VPA2 ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Exhaust Manifold: Installation
INSTALLATION PROCEDURE 1. INSTALL STUD BOLT HINT: If a stud bolt is deformed or its threads are damaged, replace it. (a) Using an E8 "TORX" socket wrench, install the 2 stud bolts to the exhaust manifold (TWC: Front Catalyst). Torque: 19.5 N·m {199 kgf·cm, 14 ft·lbf} (b) Using ...