CUSTOMIZE PARAMETERS
CUSTOMIZE POWER MIRROR CONTROL SYSTEM (w/o Memory)
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Others.
(5) Select the setting by referring to the table below.
Others| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Auto Fold Mirror | Function that changes the condition under which the outer mirrors automatically retract | Door Lock | 01:ACC,10:Door Lock,11:OFF | Main body ECU (Multiplex network body ECU) |
| Reverse Coupled Actuation Mirror Angle | Function that turns the reverse shift-linked mirror position memorization function on or off | User Setting | 0:Default Setting,1:User Setting | Main body ECU (Multiplex network body ECU) |
How To Proceed With Troubleshooting
Operation CheckLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Smart Access System With Push-button Start (for Start Function): System Voltage or GND Energization Malfunction (B228B)
SYSTEM DESCRIPTION This DTC is stored when there is a malfunction in the certification ECU (smart key ECU assembly) battery power supply circuit or ground circuit. DTC No. Detection Item DTC Detection Condition Trouble Area Note B228B System Voltage or GND Energization Malfunction ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Angle Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during steering sensor removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Re ...