Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

2. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY

NOTICE:

The regulator arm must be below the intermediate position when installing the power window regulator motor assembly.

(a) Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with the 3 screws.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

HINT:

When replacing a power window regulator motor assembly, a new power window regulator motor assembly uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

3. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

Click here

4. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

Click here

5. INSTALL FRONT DOOR SERVICE HOLE COVER

Click here

6. INSTALL FRONT DOOR NO. 1 TRIM BRACKET

Click here

7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Click here

8. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

Click here

9. INSTALL COURTESY LIGHT ASSEMBLY

Click here

10. INSTALL DOOR ARMREST COVER

Click here

11. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Driver Side)

Click here

12. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL (for Front Passenger Side)

Click here

13. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

Click here

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

15. INITIALIZE POWER WINDOW CONTROL SYSTEM

Click here

16. INSPECT POWER WINDOW OPERATION

Click here