INSPECTION
PROCEDURE
1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY
HINT:
This check should be performed with the headlight cleaner motor and pump assembly installed on the washer jar.
(a) Fill the washer jar with washer fluid.
| (b) Connect a battery positive (+) lead to terminal 2 of the headlight cleaner motor and pump assembly, and a battery negative (-) lead to terminal 1. |
|
(c) Check that washer fluid flows from the washer jar.
OK:
Washer fluid flows from the washer jar.
If the result is not as specified, replace the headlight cleaner motor and pump assembly.
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Ultrasonic Sensor (for Front): Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT CENTER ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 4 (BI) - 6 (EI) Always 10 kΩ or higher 4 (BI) - 1 (BO) Always Below ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Lost Communication with Blind Spot Monitor Slave Module (U0232)
DESCRIPTION This DTC is stored when the blind spot monitor sensor LH judges that there is a communication problem with the blind spot monitor sensor RH. DTC No. Detection Item DTC Detection Condition Trouble Area U0232 Lost Communication with Blind Spot Monitor Slave Module The blin ...