Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Front Washer Switch

Tester Connection

Condition

Specified Condition

J33-4 (EW) - J33-7 (WF)

ON

Below 1 Ω

J31-5 (WR) - J31-10 (+B2)

J33-4 (EW) - J33-7 (WF)

OFF

10 kΩ or higher

J31-5 (WR) - J31-10 (+B2)

Rear Wiper Switch

Tester Connection

Condition

Specified Condition

J33-2 (C1R) - J33-4 (EW)

OFF

10 kΩ or higher

J33-3 (+1R) - J33-4 (EW)

J33-2 (C1R) - J33-4 (EW)

INT

Below 1 Ω

J33-3 (+1R) - J33-4 (EW)

ON

Rear Washer Switch

Tester Connection

Condition

Specified Condition

J33-4 (EW) - J31-5 (WR)

ON

Below 1 Ω

J33-7 (WF) - J31-10 (+B2)

J33-4 (EW) - J31-5 (WR)

OFF

10 kΩ or higher

J33-7 (WF) - J31-10 (+B2)

If the result is not as specified, replace the windshield wiper switch assembly.

*A

w/ Auto Wiper System

*B

w/o Auto Wiper System

*a

Component without harness connected

(Windshield Wiper Switch Assembly)

    On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (a) Check the front washer operation. (1) Connect a voltmeter positive (+) lead to terminal J31-5 (WR) and a negative (-) ...

    Removal
    REMOVAL PROCEDURE 1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS Click here 2. REMOVE LOWER STEERING COLUMN COVER NOTICE: Removing the lower steering column cover in th ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Smart Access System With Push-button Start (for Start Function): Runnable Signal Malfunction (B2286,P0335)
    DESCRIPTION These DTCs are stored when the engine speed signal sent by the ECM via direct line and the engine speed signal sent via CAN communication do not match. DTC No. Detection Item DTC Detection Condition Trouble Area Note B2286 Runnable Signal Malfunction The engine speed s ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Occupant Classification Ecu: Installation
    INSTALLATION PROCEDURE 1. INSTALL OCCUPANT DETECTION ECU (a) Engage the claw to install the occupant detection ECU. NOTICE: If the occupant detection ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant detection ECU with a new one. ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0164