DESCRIPTION
This DTC is stored when a malfunction occurs in the parking assist monitor system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1610 | Camera ECU Malfunction | Malfunction occurs in the parking assist monitor system |
|
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
| 1. | CHECK DTC (PARKING ASSIST MONITOR SYSTEM) |
(a) Clear the DTCs.
Chassis > Parking Assist Camera > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Parking Assist Camera > Trouble CodesOK:
No DTCs are output.
| NG | | GO TO PARKING ASSIST MONITOR SYSTEM |
|
| 2. | CHECK DTC (AUDIO AND VISUAL SYSTEM) |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | | END |
| NG | | REPLACE RADIO RECEIVER ASSEMBLY |
XM Tuner Antenna Disconnected (B15FE,B15FF)
Back Camera Disconnected (C1622)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor Sensor: Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
Avoid any impact to the blind spot monitor sensor.
Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.
HINT:
The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitt ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > 4wd Control Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT AWD LOCK SWITCH (COMBINATION SWITCH ASSEMBLY) (a) Inspect the AWD lock switch: (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 5 (B) - 1 (GND) AWD lock switc ...