Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE COOLER DRYER

(a) Using a 14 mm straight hexagon socket wrench, remove the cap from the modulator.

*a

Modulator

(b) Using pliers, remove the cooler dryer from the modulator.

*a

Modulator

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during con ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL COOLER CONDENSER ASSEMBLY (a) Engage the 2 guides as shown in the illustration. Install in this Direction NOTICE: Do not damage the cooler condenser assembl ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vacuum Pump: Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE END COVER (for TMC Made) (a) Using a T30 "TORX" socket wrench, remove the 5 screws and end cover. NOTICE: Hold the pump so that the pump installation surface, fitting parts and oil pipe will not be damaged. As the housing deforms when force is applied, do no ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Door Opening Trim Weatherstrip: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP (a) Align the alignment mark on the rear door opening trim weatherstrip with the flange on the v ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0089