INSTALLATION
PROCEDURE
1. INSTALL COURTESY LIGHT BULB (for Bulb Type)
(a) Install the courtesy light bulb to the courtesy light housing as shown in the illustration.
| Install in this Direction |
(b) Install the courtesy light cover to the courtesy light housing as shown in the illustration.
| Install in this Direction |
(c) Engage the claw to install the courtesy light housing with the courtesy light cover as shown in the illustration.
| Install in this Direction |
2. INSTALL COURTESY LIGHT ASSEMBLY (for Front Door)
(a) Connect the connector.
| (b) Engage the claw to install the courtesy light assembly. |
|
3. INSTALL COURTESY LIGHT ASSEMBLY (for Rear Door)
(a) Connect the connector.
| (b) Engage the claw to install the courtesy light assembly. |
|
Inspection
Door Courtesy Light BulbLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lighting System: Interior Light Switch Signal Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) detects the condition of the door switch and front dome light switch. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration. Click here PROCEDURE 1. R ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Brake Actuator: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3 with the engine switch off. (b) Start the engine and run it at idle. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Brake/EPB / Active Test. HINT: Refer to the Techstream operator's man ...