REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH (for Driver Side)
Click here
2. REMOVE COWL SIDE TRIM BOARD LH (for Driver Side)
Click here
3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)
Click here
4. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH (for Driver Side)
| (a) Disengage the 2 claws to remove the No. 1 interior illumination light assembly LH. |
|
5. REMOVE FRONT DOOR SCUFF PLATE RH (for Front Passenger Side)
HINT:
Use the same procedure as for the LH side.
Click here
6. REMOVE COWL SIDE TRIM BOARD RH (for Front Passenger Side)
HINT:
Use the same procedure as for the LH side.
Click here
7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
Click here
8. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH (for Front Passenger Side)
| (a) Disengage the 2 claws to remove the No. 1 interior illumination light assembly RH. |
|
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Thermostat Heater Control Circuit Short to Ground or Open (P059714)
DESCRIPTION Refer to DTC P059712. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P059714 Thermostat Heater Control Circuit Short to Ground or Open Open or short in thermostat heater circuit and power supply circuit (1 trip detection lo ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Pre-collision System: Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Lane Control System Pre-collision ...