INSPECTION
PROCEDURE
1. INSPECT GLOVE BOX LIGHT ASSEMBLY
| (a) Inspect the glove box light. (1) Apply battery voltage to each terminal of glove box light assembly connector and check the operation of the glove box light. Result:
If the result is not as specified, replace the glove box light assembly. |
|
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Steering Gear: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 2 STEERING RACK BOOT (a) Apply lithium soap base glycol grease to the inside of the small opening of a new No. 2 steering rack boot. Lithium Soap Base Glycol Grease (b) Install the No. 2 steering rack boot to the groove on the rack housing. NOTICE:
Be ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Airbag System: Short in Rear P/T Squib (LH) Circuit (B1925-B1928)
DESCRIPTION The rear pretensioner squib LH circuit consists of the airbag sensor assembly and rear No. 1 seat outer belt assembly LH. The airbag sensor assembly uses this circuit to deploy the pretensioner when deployment conditions are met. These DTCs are stored when a malfunction is detected in th ...