Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Disassembly

Removal

REMOVAL PROCEDURE 1. REMOVE MAP LIGHT ASSEMBLY (a) Using a moulding remover, disengage the 4 clips and 2 guides. (b) Disconnect each connector to remove the map light assembly. ...

Inspection

INSPECTION PROCEDURE 1. INSPECT MAP LIGHT ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition ...

Other materials:

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Power Seat Control System(for Second Row): Operation Check
OPERATION CHECK CHECK BASIC FUNCTION HINT: The rear power seat switch is a collective term for the rear power seat switch RH and the rear power seat switch LH. (a) Operate the rear power seat switch, fold seat switch assembly and check that each switch function operates normally. Reclining operat ...

Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (C006328,C006396)
DESCRIPTION for Optitron Meter Type: These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly). for TFT Meter Type: These DTCs are stored when the skid control ECU (bra ...