Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL COMBINATION METER GLASS (for Optitron Meter Type)

(a) Engage the 8 claws to install the combination meter glass.

2. INSTALL COMBINATION METER GLASS (for TFT Meter Type)

(a) Engage the 9 claws to install the combination meter glass.

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during comb ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL COMBINATION METER ASSEMBLY (a) Connect each connector. (b) Engage the clamp. (c) Install the combination meter assembly with the 4 screws. 2. INSTALL INSTRUMENT CLUST ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Airbag Sensor(w/o Rear No. 2 Seat): Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear airbag sensor removal/installation are shown below. Necessary Procedure After Parts Removed/Insta ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Check Bus 3 Line for Short to GND
    DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 6 (CA3H) of the network gateway ECU and terminal 4 (CG) of the DLC3, or terminal 21 (CA3L) of the network gateway ECU and terminal 4 (CG) of the DLC3. Symptom Trouble A ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0168