SYSTEM DESCRIPTION
GENERAL
(a) The seat blower has 3 levels of volume, controlled by operating the refreshing seat switch.
(b) Whether the blower is on or off can be determined by checking if the refreshing seat switch indicator light is on or off.
(c) The blowers of both seats are controlled by the air conditioning amplifier assembly.
(d) Set the refreshing seat switch to AUTO and the seat heater and seat blower operate automatically according to the target outlet air temperature of the air conditioning system.
HINT:
System Diagram
Customize ParametersLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear No. 1 Seat Inner Belt Assembly(for Captain Seat Type): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (a) Install the rear seat inner belt assembly LH with the bolt. Torque: 42 N·m {428 kgf·cm, 31 f ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Navigation System: Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) (a) Disconnect the J148 ...