Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: System Description
SYSTEM DESCRIPTION
FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION
- The driver seat is equipped with slide, reclining, lifter, front vertical, lumbar support adjustment and cushion length* functions.
-
The memory call function uses the key ID code of each electrical key transmitter sub-assembly to memorize and recall the appropriate driving position for each individual who possesses a master key or sub key.
- *: w/ Seat Variable Cushion Switch
FUNCTION OF MAIN COMPONENT
| Component | Function | |
|---|---|---|
| Position control ECU and switch assembly LH | Receives position signals from the position sensors. Outputs seat adjuster signals to the front seat adjuster assembly LH to adjust the seat accordingly. | |
| Front seat adjuster assembly LH | Slide motor | Receives signals from the position control ECU and switch assembly LH, and slides the seat forward and rearward. |
| Front vertical motor | Receives signals from the position control ECU and switch assembly LH, and raises and lowers the front of the seat cushion. | |
| Lifter motor | Receives signals from the position control ECU and switch assembly LH, and raises and lowers the seat cushion. | |
| Cushion length motor* | Receives a signal from the seat variable cushion switch (driver seat), and slide the seat cushion forward and rearward. | |
| Position sensor | Built into each motor and send position signals to the position control ECU and switch assembly LH to detect the position of the seat. | |
| Front seatback frame sub-assembly LH | Reclining motor | Receives signals from the position control ECU and switch assembly LH, and tilts the seatback forward and rearward. |
| Lumbar support adjuster assembly LH | Receives signals from the front lumbar power seat switch (driver seat) and operates the built-in motor to adjust the lumbar support. | |
| Seat memory switch LH | If the SET switch is being pressed when one of the M1, M2 or M3 seat memory switches is pressed, or if one of the M1, M2 or M3 switches is pressed within 3 seconds of pressing the SET switch, the outer mirror control ECU assembly (driver door) sends the signals so that the seat position can be stored. Then, when a seat memory switch LH is pressed, a signal is sent to the outer mirror control ECU assembly (driver door) and the seat position changes according to memory. | |
| Front lumbar power seat switch (driver seat) | Operates the motor built into the lumbar support adjuster assembly LH according to switch operation. | |
- *: w/ Seat Variable Cushion Switch
SYSTEM OPERATION
The front power seat functions which can be operated with the power seat motors and memorized are shown below.
| Seat Function | Driver Seat |
|---|---|
| Slide | Power and Memory |
| Reclining | Power and Memory |
| Front Vertical | Power and Memory |
| Lifter | Power and Memory |
| Lumbar Support adjustment | Power |
| Cushion Length* | Power |
- *: w/ Seat Variable Cushion Switch
The seat memory switch LH sends memory switch information to the outer mirror control ECU assembly. Then the information is sent to the main body ECU (multiplex network body ECU) via CAN communication and then an instruction to memorize the seat position is sent to the position control ECU and switch assembly LH via CAN communication. As a result, the seat position is memorized.
Parts Location
PARTS LOCATION ILLUSTRATION *1 FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (DRIVER DOOR) *2 FRONT SEAT OUTER BELT ASSEMBLY LH *3 SEAT MEMORY SWITCH LH *4 OUTER MIRROR CONTROL ECU ASS ...
System Diagram
SYSTEM DIAGRAM Communication Table Sender Receiver Signal Line ECM Main Body ECU (Multiplex Network Body ECU)
Transmission information
Shift position P signal
CAN Ou ...
Other materials:
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vsc Off Switch: Removal
REMOVAL PROCEDURE 1. REMOVE REAR CONSOLE UPPER PANEL Click here 2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Click here 3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Click here 4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Click here 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lin Communication System: Lost Communication with Power Source Control (B278C)
DESCRIPTION This DTC is stored when LIN communication between the certification ECU (smart key ECU assembly) and power management control ECU stops for 10 seconds or more. DTC No. Detection Item DTC Detection Condition Trouble Area B278C Lost Communication with Power Source Control ...
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual
- For your information
- Pictorial index
- For safety and security
- Instrument cluster
- Operation of each component
- Driving
- Lexus Display Audio system
- Interior features
- Maintenance and care
- When trouble arises
- Vehicle specifications
- For owners
Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual
0.0092