INSTALLATION
PROCEDURE
1. INSTALL NO. 1 FOLD SEAT SWITCH ASSEMBLY (for Rear Side)
(a) Engage the 2 guides and 4 claws to install the No. 1 fold seat switch assembly as shown in the illustration.
| Install in this Direction |
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for Rear Side)
Click here
3. INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (for Rear Side)
Click here
4. INSTALL NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (for Rear Side)
Click here
5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for Rear Side)
Click here
6. INSTALL ROPE HOOK ASSEMBLY (for Rear Side)
Click here
7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for Rear Side)
Click here
8. INSTALL REAR SEAT SIDE GARNISH LH (for Rear Side)
Click here
9. INSTALL FRONT DECK SIDE TRIM COVER LH (for Rear Side)
Click here
10. INSTALL REAR SEAT OUTER TRACK BRACKET COVER LH (for Rear Side)
for 60/40 Split Seat Type:
Click here
for Captain Seat Type:
Click here
11. INSTALL REAR DOOR INSIDE SCUFF PLATE LH (for Rear Side)
Click here
12. INSTALL REAR DOOR SCUFF PLATE LH (for Rear Side)
Click here
13. INSTALL REAR FLOOR FINISH PLATE (for Rear Side)
Click here
14. INSTALL FRONT DECK FLOOR BOX (for Rear Side)
Click here
15. INSTALL REAR DECK FLOOR BOX (for Rear Side)
Click here
16. INSTALL DECK SIDE TRIM BOX LH (for Rear Side)
Click here
17. CONNECT REAR NO. 2 SEAT ASSEMBLY (for Rear Side)
Click here
18. INSTALL NO. 1 DECK BOARD (for Rear Side)
Click here
19. INSTALL REAR NO. 4 FLOOR BOARD (for Rear Side)
Click here
20. INSTALL DECK BOARD ASSEMBLY (for Rear Side)
Click here
21. INSTALL TONNEAU COVER ASSEMBLY (for Rear Side)
Click here
22. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Front Side)
(a) Engage the 2 guides and 4 claws to install the fold seat switch assembly as shown in the illustration.
| Install in this Direction |
23. INSTALL REAR SEAT SIDE GARNISH RH (for Front Side)
HINT:
Use the same procedure as for the LH side.
Click here
24. INSTALL FRONT DECK SIDE TRIM COVER RH (for Front Side)
HINT:
Use the same procedure as for the LH side.
Click here
25. INSTALL REAR SEAT OUTER TRACK BRACKET COVER RH (for Front Side)
for 60/40 Split Seat Type:
Click here
for Captain Seat Type:
HINT:
Use the same procedure as for the LH side.
Click here
26. INSTALL REAR DOOR INSIDE SCUFF PLATE RH (for Front Side)
HINT:
Use the same procedure as for the LH side.
Click here
27. INSTALL REAR DOOR SCUFF PLATE RH (for Front Side)
HINT:
Use the same procedure as for the LH side.
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: ABS Pump Motor Control Circuit Open (C052C13,C052C49,C052F14)
DESCRIPTION The motor relay and motor fail safe relay are built into the brake actuator assembly. When the skid control ECU (brake actuator assembly) operate ABS, TRAC, VSC, brake hold or brake assist, the motor relay turns ON and drives the motor pump built into the brake actuator assembly. If any ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Outer Rear View Mirror: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY (a) Engage the 2 guides and claw. (b) Temporarily install the outer rear view mirror ...