INSTALLATION
PROCEDURE
1. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment)
(a) Connect the connector.
(b) Engage the 4 claws to install the fold seat switch assembly. |
|
2. INSTALL REAR POWER SEAT SWITCH RH (for 60/40 Split Seat Type RH Side)
(a) Engage the 2 claws to install the rear power seat switch RH as shown in the illustration.
![]() | Remove in this Direction |
3. INSTALL POWER SEAT SWITCH ASSEMBLY (for 60/40 Split Seat Type RH Side)
(a) Connect the connector.
(b) Engage the 2 claws to install the power seat switch assembly as shown in the illustration.
![]() | Remove in this Direction |
4. INSTALL REAR POWER SEAT SWITCH LH (for 60/40 Split Seat Type LH Side)
HINT:
Use the same procedure as for the RH side.
5. INSTALL POWER SEAT SWITCH ASSEMBLY (for 60/40 Split Seat Type LH Side)
HINT:
Use the same procedure as for the RH side.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Short to GND in Outer Mirror Indicator(Slave) (C1AB3)
DESCRIPTION This DTC is stored when the blind spot monitor sensor RH detects a short to ground in the outer rear view mirror indicator RH. DTC No. Detection Item DTC Detection Condition Trouble Area C1AB3 Short to GND in Outer Mirror Indicator(Slave) Both of the following condition ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Yaw Rate And Acceleration Sensor: Installation
INSTALLATION PROCEDURE 1. INSTALL YAW RATE SENSOR ASSEMBLY (a) Install the yaw rate sensor assembly with the 2 bolts. Torque: 14.5 N·m {148 kgf·cm, 11 ft·lbf} NOTICE:
Do not drop the yaw rate sensor assembly.
If the yaw rate sensor assembly is dropped, replace it with a new one.
(b) Conn ...