Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT SEAT HEATER ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Seat heater temperature 20 °C (68 °F)

3.98 to 4.78 Ω

If the result is not as specified, replace the seat heater assembly (for LH side).

*a

Component without harness connected

(Seat Heater Assembly (for LH Side))

    Components
    COMPONENTS ILLUSTRATION *A w/o Rear No. 2 Seat *B for Manual Seat *C for Power Seat - - *1 NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH *2 POWER SEAT SWITCH ASSEMBLY *3 ...

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Gear: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL NO. 2 STEERING RACK BOOT (a) Apply lithium soap base glycol grease to the inside of the small opening of a new No. 2 steering rack boot. Lithium Soap Base Glycol Grease (b) Install the No. 2 steering rack boot to the groove on the rack housing. NOTICE: Be ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic High Beam Main Switch: Inspection
    INSPECTION PROCEDURE 1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (AUTOMATIC HIGH BEAM SWITCH) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (+B) - 10 (E) Integration control and p ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0086