COMPONENTS
ILLUSTRATION
| *A | for TMC Made | *B | for TMMC Made |
| *1 | DECK BOARD ASSEMBLY | *2 | DECK SIDE TRIM BOX RH |
| *3 | FRONT DECK FLOOR BOX | *4 | REAR DECK FLOOR BOX |
| *5 | REAR FLOOR FINISH PLATE | *6 | REAR NO. 3 FLOOR BOARD |
| *7 | REAR NO. 4 FLOOR BOARD | *8 | TONNEAU COVER ASSEMBLY |
ILLUSTRATION
| *1 | DECK TRIM SIDE PANEL ASSEMBLY LH | *2 | NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY |
| *3 | NO. 1 LUGGAGE COMPARTMENT TRIM HOOK | *4 | REAR DOOR SCUFF PLATE LH |
| *5 | REAR FLOOR FINISH SIDE PLATE LH | *6 | REAR SEAT SIDE GARNISH LH |
| *7 | ROPE HOOK ASSEMBLY | *8 | UPPER QUARTER TRIM PAD LH |
ILLUSTRATION
| *1 | FUEL PUMP CONTROL ECU ASSEMBLY | *2 | NO. 2 DECK BOARD REINFORCEMENT |
| *3 | REAR NO. 1 SPEAKER BRACKET | *4 | REAR NO. 3 SPEAKER ASSEMBLY |
| N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vacuum Pump: Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE END COVER (for TMC Made) (a) Using a T30 "TORX" socket wrench, remove the 5 screws and end cover. NOTICE:
Hold the pump so that the pump installation surface, fitting parts and oil pipe will not be damaged.
As the housing deforms when force is applied, do no ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Driving Support Buzzer: Inspection
INSPECTION PROCEDURE 1. INSPECT SKID CONTROL BUZZER ASSEMBLY (a) Make sure that there is no looseness in the locking part and connecting part of the connector. (b) Disconnect the skid control buzzer assembly connector. (c) Check the connector and terminals for deformation and corrosio ...