INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH
(a) Install the rear seat inner belt assembly LH with the bolt.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the anchor part of the rear seat inner belt assembly LH to overlap the protruding parts of the rear seat cushion frame sub-assembly.
| Protruding Part |
(b) Engage 2 clamps.
(c) Connect the connector.
2. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER
Click here
3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
Click here
4. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
Click here
5. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
Click here
6. INSTALL REAR SEAT COVER CAP LH
Click here
7. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Seat Outer Belt Assembly: Disposal
DISPOSAL CAUTION / NOTICE / HINT CAUTION: Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Pre-disposal deployment may be considered hazardous material treatment. PROCEDURE 1. PRECAUTION CAUTION:
...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Seat Heater System: Operation Check
OPERATION CHECK CHECK FRONT SEAT HEATER (a) Turn the engine switch on (IG). (b) Turn the refreshing seat switch (for front side) (heater position) on and check that the indicator illuminates and the surface of the front seat warms up. (c) Check that the front seat surface temperature changes accordi ...