Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT INNER BELT ASSEMBLY LH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

3 - 4

Rear seat belt LH unfastened

Below 1 Ω

Rear seat belt LH fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner belt assembly LH.

*a

Component without harness connected

(Rear Seat Inner Belt Assembly LH)

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (a) Install the rear seat inner belt assembly LH with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow th ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Parking Assist Ecu: Components
    COMPONENTS ILLUSTRATION *1 COWL SIDE TRIM BOARD RH *2 FRONT DOOR SCUFF PLATE RH *3 GLOVE COMPARTMENT DOOR ASSEMBLY *4 INSTRUMENT PANEL GARNISH RH *5 LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL *6 NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY *7 PARKING ASSIST ECU ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Seat Variable Cushion Switch: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during seat variable cushion switch removal/installation are shown below. Necessary Procedures After Parts Remo ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0172