ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the horn button assembly.
PROCEDURE
1. INSPECT HORN BUTTON ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the horn button assembly installed to the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the horn button assembly with a new one.
2. INSPECT HORN BUTTON ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the horn button assembly removed from the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the horn button assembly or steering wheel assembly with a new one.
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Theft Deterrent System: Engine Hood Courtesy Switch Circuit
DESCRIPTION The engine hood courtesy switch is built into the hood lock assembly. This switch turns on when the engine hood is closed and turns off when the engine hood is opened. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer t ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (C006328,C006396)
DESCRIPTION for Optitron Meter Type:
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
for TFT Meter Type:
These DTCs are stored when the skid control ECU (bra ...