Lexus RX (RX 350L, RX450h) 2016-2024 Owners Manual: Driving position memory

This feature automatically adjusts the driver's seat (on some models), steering wheel, outside rear view mirrors and head-up display (if equipped) to make entering and exiting the vehicle easier or to suit your preferences.

Power easy access system (driver's side only)

The seat and steering wheel are automatically adjusted to allow the driver to enter and exit the vehicle easily.

When all of the following have been performed, the seat and steering wheel are automatically adjusted to a position that allows driver to enter and exit the vehicle easily.

  • The shift lever has been shifted to P.
  • The power switch has been turned off.
  • The driver's seat belt has been unfastened.

Lexus RX. Adjusting the seats

When any of the following has been performed, the seat and steering wheel automatically return to their original positions.

  • The power switch has been turned to ACCESSORY mode or ON mode.
  • The driver's seat belt has been fastened.

 

■ Operation of the power easy access system When exiting the vehicle, the power easy access system may not operate if the seat is already close to the rearmost position, etc.

■ Customization Some functions can be customized.

Driving position memory

Your preferred driving position (the position of the driver's seat, steering wheel, outside rear view mirrors and head-up display*) can be recorded and recalled by pressing a button.

Three different driving positions can be recorded into memory.

*: If equipped

■ Recording procedure

1. Check that the shift lever is in P.

2. Turn the power switch to ON mode.

3. Adjust the driver's seat, steering wheel, outside rear view mirrors and head-up display (if equipped) to the desired positions.

4. While pressing the "SET" button, or within 3 seconds after the "SET" button is pressed, press button "1", "2" or "3" until the buzzer sounds.

If the selected button has already been preset, the previously recorded position will be overwritten.

Lexus RX. Adjusting the seats

■ Recall procedure

1. Check that the shift lever is in P.

2. Turn the power switch to ON mode.

3. Press one of the buttons for the driving position you want to recall until the buzzer sounds.

Lexus RX. Adjusting the seats

■ To stop the position recall operation part-way through Perform any of the following:

  • Press the "SET" button.
  • Press button "1", "2" or "3".
  • Operate any of the seat adjustment switches (only cancels seat position recall).
  • Operate the tilt and telescopic steering control switch (only cancels steering wheel position recall).

■ Seat positions that can be memorized The adjusted positions other than the position adjusted by lumbar support switch can be recorded.

■ Operating the driving position memory after turning the power switch off Recorded seat positions can be activated up to 180 seconds after the driver's door is opened and another 60 seconds after it is closed again.

■ In order to correctly use the driving position memory function If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled.

Memory recall function (driver's side only)

Each electronic key can be registered to recall your preferred driving position.

■ Registering procedure Record your driving position to button "1", "2" or "3" before performing the following: Carry only the key you want to register, and then close the driver's door.

If 2 or more keys are in the vehicle, the driving position cannot be recorded properly.

1. Check that the shift lever is in P.

2. Turn the power switch to ON mode.

3. Recall the driving position that you want to record.

4. While pressing the recalled button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds.

If the button could not be registered, the buzzer sounds continuously for approximately 3 seconds.

Lexus RX. Adjusting the seats

■ Recall procedure

1. Make sure that the doors are locked before recalling the driving position.

Carry the electronic key that has been registered to the driving position, and then unlock and open the driver's door using the smart access system with push-button start or wireless remote control.

The driving position will move to the recorded position (not including the steering wheel and head-up display*). However, the seat will move to a position slightly behind the recorded position in order to make entering the vehicle easier.

If the driving position is in a position that has already been recorded, the seat and outside rear view mirrors will not move.

*: If equipped

2. Turn the power switch to ACCESSORY mode or ON mode, or fasten a seat belt.

The seat, steering wheel and head-up display (if equipped) will move to the recorded position.

■ Cancelation procedure Carry only the key you want to cancel and then close the driver's door.

If 2 or more keys are in the vehicle, the driving position cannot be canceled properly.

1. Turn the power switch to ON mode.

2. While pressing the "SET" button, press and hold the door lock switch (either lock or unlock) until the buzzer sounds twice.

If it button could not be canceled, the buzzer sounds continuously for approximately 3 seconds.

 

■ Recalling the driving position using the memory recall function

  • Different driving positions can be registered for each electronic key. Therefore, the driving position that is recalled may be different depending on the key being carried.
  • If a door other than the driver's door is unlocked with the smart access system with push-button start, the driving position cannot be recalled. In this case, press the driving position button which has been set.

■ Customization Some functions can be customized.

WARNING

■ Seat adjustment caution Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel.

    Folding the third-row seat seatbacks (RX450hL)
    ■ Before folding the third-row seat seatbacks 1. To prevent the seat belt from being damaged, hook it to the seat belt hanger. 2. Lower the third-row seat head restraints to the lowest positio ...

    Head restraints
    Head restraints are provided for all seats. Front seats Vertical adjustment Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Cruise Control Main Switch: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during cruise control main switch removal/installation are shown below. Necessary Procedures After Parts Remove ...

    Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Black Out Tape (for Front Door): Components
    COMPONENTS ILLUSTRATION *A for Driver Side *B for Front Passenger Side *1 COURTESY LIGHT ASSEMBLY *2 DOOR ARMREST COVER *3 FRONT DOOR INSIDE HANDLE BEZEL PLUG *4 FRONT DOOR NO. 1 STIFFENER CUSHION *5 FRONT DOOR TRIM BOARD SUB-ASSEMBLY *6 MULTIPLEX NETWORK MAST ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2024 Copyright www.lexusrx.net
    0.0125