PROCEDURE
1. | CHECK AUDIO SETTINGS |
(a) Set treble, middle and bass to the initial values and check that the sound is normal.
OK:
The sound returns to normal.
HINT:
Sound quality adjustment measures vary according to the type of amplifier.
OK | ![]() | END |
|
2. | COMPARE WITH ANOTHER VEHICLE OF SAME MODEL |
(a) Compare with another vehicle of the same model which is not malfunctioning to see if there is any difference in the sound quality.
OK:
No difference is found.
OK | ![]() | END |
NG | ![]() | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Vehicle Stability Control System: Brake Warning Light Remains ON
DESCRIPTION This procedure is for troubleshooting when the brake warning light remains on but no DTCs are output. The skid control ECU (brake actuator assembly) controls the brake warning light in the combination meter assembly via CAN communication. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Side Turn Signal Light Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side turn signal light assembly removal/installation are shown below. Necessary Procedure After Parts R ...