DESCRIPTION
If DTC U1000 is stored frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U1000 | CAN Communication Failure (Message Registry) | ECU malfunction | Clearance warning ECU assembly |
PROCEDURE
| 1. | CHECK FOR DTC |
(a) Clear the DTCs.
Click here
(b) Check for DTCs.
Click here
OK:
DTC U1000 is not output.
HINT:
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even if the DTC was not output when rechecking for DTCs.
Click here
| OK | | USE SIMULATION METHOD TO CHECK |
| NG | | REPLACE CLEARANCE WARNING ECU ASSEMBLY |
Control Module Communication Bus "A" Off (U0073,U0155)
No. 1 Clearance Warning Buzzer CircuitLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Electrical Key Oscillator (for Front Floor): Removal
REMOVAL PROCEDURE 1. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY for U881E Automatic Transmission / Transaxle: Click here for U881F Automatic Transmission / Transaxle: Click here 2. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Click here 3. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Telematics ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door Touch Sensor: Inspection
INSPECTION PROCEDURE 1. INSPECT POWER BACK DOOR SENSOR ASSEMBLY LH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 Not pressed 950 to 1050 Ω 1 - 2 Pressed Below 100 Ω I ...