DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes(e) Check the details of the DTCs.
Click here
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs(e) According to the display on the Techstream, select the trouble code data display with the clear button.
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Camshaft Oil Control Valve (for Bank 1): On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY Click here 2. INSPECT CAMSHAFT TIMING GEAR BOLT (a) for intake side: (1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 4.5 mm (0.177 in.) or more HINT: W ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Sfi System: Cold Start Ignition Timing Performance (P050B00)
MONITOR DESCRIPTION This monitor will run when the engine is started at an engine coolant temperature of -10 to 50°C (14 to 122°F). The DTC is stored after the engine idles for 13 seconds (2 trip detection logic). The DTC is designed to monitor the ignition timing at cold start. When the engine is ...