DESCRIPTION
This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
C1626 | Steering Angle Sensor Failure | A fail flag is transmitted from the steering sensor |
|
CAUTION / NOTICE / HINT
NOTICE:
Click here
Click here
PROCEDURE
1. | REPLACE STEERING SENSOR |
(a) Replace the steering sensor with a new or known good one.
Click here
|
2. | CHECK DTC OUTPUT |
(a) Clear the DTCs.
Click here
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Result | Proceed to |
---|---|
DTC C1626 is output | A |
DTC C1626 is not output | B |
A | ![]() | REPLACE REAR TELEVISION CAMERA ASSEMBLY |
B | ![]() | END |
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Pre-collision System: Internal Control Module Software Incompatibility Not Programmed (U030051)
DESCRIPTION The forward recognition camera receives vehicle information from the ECM via CAN communication. If the forward recognition camera cannot store the vehicle information, it will store this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area U030051 Internal Cont ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Rear Power Seat Control System(for Third Row): Position Sensor Circuit
DESCRIPTION When a fold seat control ECU receives signals from the fold seat switch assembly or No. 1 fold seat switch assembly, it operates the reclining motor and lifter motor of its corresponding rear No. 2 power seat. When the reclining motor or lifter motor is operating, the position sensor (Ha ...