DESCRIPTION
The skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
---|---|---|---|
C052696 | Steering Angle Sensor Module Component Internal Failure | With the +BS terminal voltage 9.5 to 17.4 V, the skid control ECU receives an error signal from the steering angle sensor. | Steering angle sensor |
PROCEDURE
1. | REPLACE STEERING ANGLE SENSOR |
(a) Replace the steering angle sensor.
Click here
NEXT | ![]() | END |
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Curtain Shield Airbag Assembly (w/o Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the curtain shield airbag assembly removal/installation are shown below. Necessary Procedure After Parts R ...
Lexus RX (RX 350L, RX450h) 2016-2023 Repair Manual > Smart Access System With Push-button Start (for Start Function): Terminals Of Ecu
TERMINALS OF ECU CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (a) Disconnect the A74, R1 and J41 certification ECU (smart key ECU assembly) connectors. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the ...