REMOVAL
PROCEDURE
1. REMOVE REAR CONSOLE UPPER PANEL
Click here
2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
6. REMOVE CONSOLE PANEL SUB-ASSEMBLY
Click here
7. REMOVE CONSOLE BOX ORNAMENT
Click here
8. REMOVE AWD LOCK SWITCH (COMBINATION SWITCH ASSEMBLY)
Click here
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure LKA/LDA System Intelligent Clearance ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Radiator: On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns. PROCEDURE 1. CHECK RADIATOR CAP SUB-ASSEMBLY CAUTION: Do not re ...