INSTALLATION
PROCEDURE
1. INSTALL TRANSFER ASSEMBLY
(a) Install 4 new transfer and transaxle setting stud bolts to the automatic transaxle assembly positions shown in the illustration.
| *a | 69 mm (2.72 in.) | *b | 49 mm (1.93 in.) |
| *c | 22 mm (0.866 in.) | - | - |
Torque:
39.2 N·m {400 kgf·cm, 29 ft·lbf}
NOTICE:
Install the sealed side of the transfer and transaxle setting stud bolt to the automatic transaxle assembly.
(b) Install the transfer assembly to the automatic transaxle assembly with the 8 nuts.
Torque:
68.6 N·m {700 kgf·cm, 51 ft·lbf}
NOTICE:
2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
Click here
Inspection
DisassemblyLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Panoramic View Monitor System: Steering Angle Sensor Failure (C1626)
DESCRIPTION This DTC is stored if the parking assist ECU receives a signal via CAN communication from the steering sensor that indicates an internal malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area C1626 Steering Angle Sensor Failure A fail flag is transmitte ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Brake: Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Perform the removal and installation of the front disc brake piston, cylinder boot and piston seal one side at a time. PROCEDURE 1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG HINT: Fully tighten the front disc brake bleeder plug after bleeding the syst ...