COMPONENTS
ILLUSTRATION
| *1 | FRONT OIL PUMP OIL SEAL | *2 | FRONT OIL PUMP BODY O-RING |
| *3 | FRONT OIL PUMP BODY SUB-ASSEMBLY | *4 | FRONT OIL PUMP DRIVEN GEAR |
| *5 | FRONT OIL PUMP DRIVE GEAR | *6 | FRONT OIL PUMP BODY AND GEAR SUB-ASSEMBLY |
| *7 | STATOR SHAFT ASSEMBLY | *8 | CLUTCH DRUM OIL SEAL RING |
| *9 | VALVE BODY OIL STRAINER ASSEMBLY | - | - |
| Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| ATF WS | | MP grease |
Oil Pump
DisassemblyLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Cornering Light Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL CORNERING LIGHT ASSEMBLY (FOG LIGHT ASSEMBLY) Click here 2. INSTALL FRONT BUMPER ARM HOLE COVER LH (for LH Side) for Type A: Click ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Generator (for 180 A Type): Inspection
INSPECTION PROCEDURE 1. INSPECT GENERATOR PULLEY WITH CLUTCH (a) Hold the center of the generator pulley with clutch, and confirm that the outer ring turns counterclockwise and does not turn clockwise. OK: The outer ring turns counterclockwise and does not turn clockwise. If the result is not as sp ...