INSPECTION
PROCEDURE
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below when the transmission control shaft lever is moved to each position. Standard Resistance:
If the result is not as specified, replace the park/neutral position switch assembly. |
|
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Lighting (int): Vanity Light
ComponentsCOMPONENTS ILLUSTRATION *1 VANITY LIGHT ASSEMBLY *2 VANITY LIGHT BULB RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE VANITY LIGHT ASSEMBLY (a) Using a m ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Camshaft Oil Control Solenoid (for Bank 2): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during camshaft timing oil control solenoid assembly removal/installation are shown below. Necessary Procedures ...