INSPECTION
PROCEDURE
1. INSPECT FUEL INJECTOR ASSEMBLY
NOTICE:
This inspection is for checking the fuel injector assembly for an open or short. Because the fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the fuel injector assembly. |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Airbag System: Short in D Squib (Dual Stage - 2nd Step) Circuit (B1810-B1813)
DESCRIPTION The driver squib 2nd step circuit consists of the airbag sensor assembly, spiral cable sub-assembly and horn button assembly. The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs are stored when a malfunction is detected in the ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Rough Idling (P160500)
DESCRIPTION This DTC is stored if the combustion state of any cylinder is unstable. Using the Techstream, the conditions present when the DTC was stored can be confirmed by referring to the freeze frame data. Freeze frame data records engine conditions when a malfunction occurs. This information can ...