DESCRIPTION
This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the audio and visual system vehicle customization screen.
HINT:
The air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the multi-display assembly screen.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15F5 | Air Conditioner ECU Vehicle Information Reading/Writing Processor Malfunction | Air conditioning amplifier assembly vehicle setting processing malfunction |
|
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
| 1. | CHECK CAN COMMUNICATION SYSTEM |
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
OK:
CAN communication DTCs are not output.
| NG | | GO TO CAN COMMUNICATION SYSTEM |
|
| 2. | CHECK AIR CONDITIONING SYSTEM |
(a) Check if the air conditioning system is malfunctioning.
Click here
HINT:
Customization may not be possible depending on the malfunction in the air conditioning system.
OK:
No malfunctions are present in the air conditioning system.
| NG | | GO TO AIR CONDITIONING SYSTEM |
|
| 3. | CLEAR DTC |
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
|
| 4. | CHECK FOR DTC |
(a) Recheck for DTCs.
Body Electrical > Navigation System > Trouble Codes| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
| A | | END |
| B | | REPLACE RADIO RECEIVER ASSEMBLY |
Display Disconnected (B15D6)
Main Body ECU Vehicle Information Reading/Writing Process Malfunction (B15F6)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Headlight Assembly: Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. REMOVE FRONT TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light) (a) Disconnect the connector. (b) Turn the front turn si ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Transfer Assembly: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR TRANSFER DRIVEN PINION BEARING (OUTER RACE) (a) Using SST and a press, install the rear transfer driven pinion bearing (outer race) to the transfer case sub-assembly. SST: 09950-60010 09951-00620 SST: 09950-70010 09951-07150 NOTICE:
Keep the transfer case ...