CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
1. | CHECK PANEL SWITCH |
(a) Check for foreign matter around the switches that might prevent operation.
OK:
No foreign matter is found.
NG | ![]() | REMOVE ANY FOREIGN MATTER FOUND |
|
2. | CHECK PANEL & STEERING SWITCH (OPERATION CHECK) |
(a) Enter the "Panel&Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check. Click here |
|
(b) Operate the abnormal switch and check if the switch status is correctly displayed.
OK:
The switch status is correctly displayed as operated.
OK | ![]() | REPLACE RADIO RECEIVER ASSEMBLY |
NG | ![]() | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lighting System (w/ Automatic Headlight Beam Level Control System): Left Headlight ECU Variation Error (B2456)
DESCRIPTION This DTC is stored if the No. 1 headlight ECU sub-assembly LH for another destination is installed. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from B2456 Left Headlight ECU Variation Error
The engine switch is on (IG).
Vehicle speci ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Center Seat Inner Belt Assembly(w/o Rear No. 2 Seat): Inspection
INSPECTION PROCEDURE 1. INSPECT REAR CENTER SEAT INNER BELT ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 Rear center seat belt unfastened Below 1 Ω Rear center seat ...