INSTALLATION
PROCEDURE
1. INSTALL QUICK HEATER ASSEMBLY
(a) Engage the guide to install the quick heater assembly as shown in the illustration.
| Install in this Direction |
(b) Connect the 2 connectors.
2. INSTALL NO. 2 HEATER COVER
(a) Engage the guide and claw.
(b) Install the No. 2 heater cover with the screw.
3. INSTALL NO. 4 AIR DUCT SUB-ASSEMBLY
Click here
4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
Click here
5. INSTALL CONSOLE BOX ASSEMBLY
Click here
6. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
Click here
Removal
Rear Air Conditioning PanelLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Lock System: System Diagram
SYSTEM DIAGRAM Circuit Description Component Outline Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly)
The steering is locked and unlocked by communicating with the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) via LIN communicati ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Window Control System: Terminals Of Ecu
TERMINALS OF ECU CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (a) Disconnect the N7 multiplex network master switch assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconn ...