INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the 2 claws to install the No. 1 interior illumination light assembly.
2. INSTALL REAR CONSOLE BOX GARNISH
Click here
3. INSTALL CONSOLE PANEL SUB-ASSEMBLY
Click here
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
7. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
8. INSTALL REAR CONSOLE UPPER PANEL
Click here
Removal
Console Box Light (for Console Box Rear Side)Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Airbag Sensor(w/o Rear No. 2 Seat): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR AIRBAG SENSOR (a) Check that the engine switch is off. (b) Check that the cable is disconnected from the negative (-) battery t ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Navigation System: Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter
DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) (a) Disconnect the J148 ...