Components
COMPONENTS
ILLUSTRATION
| *1 | FRONT DOOR SCUFF PLATE LH | *2 | FRONT DOOR SCUFF PLATE RH |
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH
Click here
2. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT DOOR SCUFF PLATE LH
| (a) Inspect the front scuff plate light. (1) Apply battery voltage to each terminal of scuff plate light connector and check the operation of the scuff plate light. Result:
If the result is not as specified, replace the front door scuff plate LH. |
|
2. INSPECT FRONT DOOR SCUFF PLATE RH
| (a) Inspect the front scuff plate light. (1) Apply battery voltage to each terminal of scuff plate light connector and check the operation of the scuff plate light. Result:
If the result is not as specified, replace the front door scuff plate RH. |
|
Room Light
Vanity LightLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Seat Outer Belt Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear seat outer belt assembly removal/installation are shown below. Necessary Procedure After Parts Remo ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Intuitive Parking Assist System (w/ Intelligent Clearance Sonar System): Rear Sensor Communication Malfunction (C1AED)
DESCRIPTION This DTC is stored when there is an open or short circuit in the communication line between the rear sensors and the ECU, or when there is a malfunction in a rear sensor. DTC No. Detection Item DTC Detection Condition Trouble Area C1AED Rear Sensor Communication Malfunctio ...