CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
PROCEDURE
1. | CHECK OPERATION |
(a) Press the disc eject switch of the radio receiver assembly for 5 seconds or more and check that the disc is ejected.
OK:
Disc is ejected.
NG | REPLACE RADIO RECEIVER ASSEMBLY |
|
2. | REPLACE DISC AND RECHECK |
(a) Replace the disc with a new or known good one and check that the malfunction disappears.
OK:
Disc is ejected.
OK | END (DISC WAS FAULTY) |
NG | REPLACE RADIO RECEIVER ASSEMBLY |
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Pre-collision System: Terminals Of Ecu
TERMINALS OF ECU NOTICE:
DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
Do not apply excessive force to the forward recognition camera connector.
CHECK FORWARD RECOGNITI ...
Lexus RX (RX 350L, RX450h) 2016-2024 Repair Manual > Rear Seat Assembly (for 60/40 Split Seat Type Lh Side): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear seat assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Install ...